Thumper996 |
02-01-2010 11:29 PM |
On another note, you can get rid of that ugly overflow bottle and use the front down tube of the frame for an overlfow. The bottom is caped off and all you have to do is JB weld the 1/8" hole ob the frame by the coil, drill and put in two 90 degree fittings at the bottom left side and top left side with some more JB weld. Bottom one aims up, top on eaims down. Slip the original hose from radiator to the bottom one and a new hose from the top one down under the engine. Some some race coolant in the downtube via the hose from the radiator and bam, you have an overflow tank.
Mine has been that way for 5 years.....
|