A lift for Trip.
 

I just used a strong milk crate when I had the DRZ

At first I was, "O NOES! WOOD!," but then I was all "Oak is the shit!"

thats pretty neat, reminds me why my klr has a center stand

I once bent up a tubular lift for someone just like that (only made of steel tubing).

I want something like that that uses the rear axle bolt or the frame sliders to lift the bike. I really want something like a swingarm stand that doesnt use the swingarm, spools or the neck. I've seen very expensive versions but nothing cheap that can be recreated at home

http://www.youtube.com/watch?v=QWlV_...eature=related



Eazy Rizer

http://www.youtube.com/watch?v=UkG2h...eature=related


I like the wheel attachment here. I guess there's a place for the kickstand to touch. I'd at least get some tie down on those wheels.

http://www.on-bike.com/images/jpg/Or...n-red-lift.jpg




http://www.youtube.com/watch?v=JMcvx...eature=related

http://www.youtube.com/watch?v=QWlV_...eature=related



Eazy Rizer

http://www.youtube.com/watch?v=UkG2h...eature=related


I like the wheel attachment here. I guess there's a place for the kickstand to touch. I'd at least get some tie down on those wheels.

http://www.on-bike.com/images/jpg/Or...n-red-lift.jpg




http://www.youtube.com/watch?v=JMcvx...eature=related

Yeh, they are all $4-700

Thy dont work for charity.

No but to me cost is a factor. What I'm looking for is a pitbull stand that works with the swingarm bolt. I'm not in a rush, and I have a design in mind, but I'm too poor to afford one of these

Like the Pit Bull Jack Stands?

Edit: They're still on the Pit Bull site, just missed them the first time... http://www.pit-bull.com/mm5/merchant...ory_Code=racer

Here's one similar to the tubing one I bent up for a buddy...but far more sophisticated, adjustable, and shit:

http://www.bikermart.co.uk/proddetail.asp?prod=PDSCUS08

It's not unlike the wooden one, in its operation.

that wooden one is pretty neat, actually

That looks decent...love the price.

When I installed my shock, on the ER, I bought a couple of truck-sized axle stands and picked up a piece of waste electrical conduit. Just popped the bike up on the rear stand by the spools, stuck an axle stand on either side, then ran the conduit through the swingarm pivot. I chocked the wheel up, at what was full shock spring extension, then did the swap. The whole thing was over in less than a 1/2 hour including cleaning the bolt threads, lubricating the pivots, and Loctite.

I've been using jack stands for years, just drop a block of wood under the kickstand and use the jack on the other side, then use another one under the exhaust or pan up front. Its actually quite stable.

http://a7.sphotos.ak.fbcdn.net/photo...86_4125487.jpg

The other thing I have done is to use an engine hoist with a pair of ratchet straps, then tie the front wheel to the hoist. It works, but the bike does swing, and short of lashing going every which way its not easy to stop the swinging

http://a2.sphotos.ak.fbcdn.net/hphot..._1943147_n.jpg

I used a ceiling joist and a couple of ratchet straps, when I swapped the shock on my VFR :lol:

I didnt the cherry picker and rachetes when I changed the oil in my forks on the vfr. It was teeter totting on the centerstand some so I fill up my luggage and swung it over the rear.


http://i284.photobucket.com/albums/l...ls027Small.jpg