Engine heat shields
Next is the rear end lights. Here is what it looks like stock
The install process for the rear indicators was the most aggrevating of all the mods. The bolts for them are facing in toward the main brake light and are behind the bar. The bottom bolt can be accessed with a wobble socket allen key by jamming in down the hole with the wiring but the top one has to be turned out with a standard hex key turning about 1/8-1/4 turn at a time. Probably took the longest of any single mod add. Didn't help that we were so tired after all day of workin on the damn thing
Here are the finished looks:
lights off
Brakes applied
Lights out pic of the front end
So, there you have it. Thats prolly the extent of the work that I will do to that bike for a good long time. Other than the little odds and end replacement upgrades for the things that break from wear and tear.
Oh and as Gas likes to say Custom isn't bolt on, and none of this stuff just bolted on.
PS all pics taken by Gas Man thanks for the garage use and the documenting.