Quote:
Originally Posted by Crazy
M4 is (hopefully) going on tomorrow. Cutty did u ever drop the entire exhaust off the bike? only problem i see is the clamp for the rear header is kinda hard to reach. other than that the install seems pretty easy
|
Never dropped the exhaust. Just used a sawzall to chop it.
Hold the new pipe up, visualize where you need to cut it (remember it needs to slip over part of the header) and then measure to double check it.
Here is a somewhat decent pic of right after I got it on. There is about 2" of the header pipe in the slip on.
Pretty much cut right behind the rear brake light switch.
