Quote:
Originally Posted by No Worries
I have an old inner tube in my garage and cut some pieces to place between the video camera mount and the handlebar. I was hoping to cut down some vibration. I put it together and went for a test ride. I found out later, I aimed it too low so I got mostly road. Plus, the vibration seems the same.
|
Here's what we do on the GoPro cameras; line the inside of the case with a piece of masking tape. The camera has a tiny bit of room to move in the case, and this helps solves that issue. (I also use this to keep the cameras straight in where they go on each bike). Also make sure to use the rubber piece on the mounting slider; this helps the most.