Changing Tires?

HRCNICK11 · 08-17-2009, 07:11 PM

I have the HF tire changer but I don't use the bar any more I have 3 MP levers and lots of the MP rim protectors. MP=motion pro.

The link I put up talks about them. Way easier on the rims and crazy simple. The problem I had with the HF tire changer was with the rim moving in the clamps and scratching the rim. But that will never happen with the 3 levers cause you do not move them side to side like you do with the HF lever.

With the 3 levers you can do them on a small peice of carpet on the ground with no problem. You just put them at 10 12 and 2 and fold them to you. I can put on the first side with just lube and no levers when the rim is clamped on the HF stand.

I also use the MP rim protectors on the rim clamps.

08-17-2009, 07:11 PM	#29
HRCNICK11 Canyon Carver Join Date: Nov 2008 Posts: 429	I have the HF tire changer but I don't use the bar any more I have 3 MP levers and lots of the MP rim protectors. MP=motion pro. The link I put up talks about them. Way easier on the rims and crazy simple. The problem I had with the HF tire changer was with the rim moving in the clamps and scratching the rim. But that will never happen with the 3 levers cause you do not move them side to side like you do with the HF lever. With the 3 levers you can do them on a small peice of carpet on the ground with no problem. You just put them at 10 12 and 2 and fold them to you. I can put on the first side with just lube and no levers when the rim is clamped on the HF stand. I also use the MP rim protectors on the rim clamps.