![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#51 |
token jewboy
Join Date: Nov 2008
Moto: CBR 900, KLR ugly ass duckling, Gas Man
Posts: 10,799
|
![]()
I'm surprised that any shop or HD themselfs would be that careless with wires. Is there any way that you can clean it up at all?
__________________
![]() |
![]() |
![]() |
![]() |
#52 |
Trip's Assistant
![]() Join Date: Feb 2008
Location: Imported from Detroit
Moto: 2009 HD Street Classic
Posts: 12,149
|
![]()
I did some after that pic. Some of the things were rubbing so I have to move a few things... Well the problem is so many wires need to go in so many different ways.... Its really more layered than the pic looks.
|
![]() |
![]() |
![]() |
#53 |
token jewboy
Join Date: Nov 2008
Moto: CBR 900, KLR ugly ass duckling, Gas Man
Posts: 10,799
|
![]()
Yeh i see what looks to be 5 sets of wire installs? If that was me, I would start by buying a bunch of different color wires, wire loom plastic and some better than radio shack quality connectors, and just build the wire harness one wire at a time from scratch.
Anyway I would try and route it like this one main harness with a few legs comming off the main one: ![]() If you build it from scratch yourself you can make the wires all length to fit, wrap everything in black plastic wire loom and it would look like a proffessional install. Again the mods themselfs are cool, just the insides need some staightening.
__________________
![]() |
![]() |
![]() |
![]() |
#54 | |
DefenderOfTheBuelliverse
![]() Join Date: Feb 2008
Location: Parts Unknown
Moto: Buell XB12R
Posts: 18,585
|
![]()
Looks good man. Nice work.
__________________
![]() Quote:
|
|
![]() |
![]() |
![]() |
#55 |
Trip's Assistant
![]() Join Date: Feb 2008
Location: Imported from Detroit
Moto: 2009 HD Street Classic
Posts: 12,149
|
![]()
Problem is derf... room! Be surprised... even those little TDR's had to get moved... Right now I want to shake it down... once I determine there are no problems and its solid I may get back in there and do some more work...
but man let me tell ya... its tough on room in there now. |
![]() |
![]() |
![]() |
#56 |
Trip's Assistant
![]() Join Date: Feb 2008
Location: Imported from Detroit
Moto: 2009 HD Street Classic
Posts: 12,149
|
![]()
What I failed to post a month ago
Well I thought I was done but decided to add a few more items to the wife's bike. Custom Dynamics Street Magic LEDs in the tail lights and front blinkers. The Nightster comes stock with red lenses. ![]() Last year I changed them out for smoked out and couldn't find red 1157 bulbs locally. Tried some reds off ebay and they sucked, so ended up with the red "socks" over bulb. ![]() ![]() They function ok but look like poo So lets make the change. Now with these newer electronics you have to put in a load equalizer, due to the less draw that the LED lights pull. So a trust worthy version is BadLands. More specifically the 3rd version specifically for the XL. So here's what we have to install ![]() ![]() Pull the seat and locate this harness plug ![]() Unplug and run the equalizer inline ![]() ![]() ![]() Tuck in and push wires back into place ![]() ![]() Pop the lens off with a flat screwdriver ![]() Pull the bulb out ![]() Plug in and twist into place with a screwdriver, just as you would with the bulb ![]() Turn the LED board to spool the wire to allow the board to fit, use the lens to hold them in place. Takes 2 hands. ![]() BAM ![]() Repeat on other tail light. The fronts also came with the orange lenses, that I replaced with smoked and orange bulbs ![]() ![]() These looked fine and worked good. However, if you do the rear, got to do the front to keep up the look. In goes the LED ![]() BAM ![]() |
![]() |
![]() |
![]() |
#57 |
Trip's Assistant
![]() Join Date: Feb 2008
Location: Imported from Detroit
Moto: 2009 HD Street Classic
Posts: 12,149
|
![]()
Lights please...
Rears ![]() Left blinker (hard to see with the wierd side light from the open garage) ![]() Fronts ![]() ![]() With these Eclipse versions for the fronts. Instead of going from level 1 brightness and blink brighter.. these actually turn off and back on instead. They say this makes them more visible. To avoid the "left hand turner in front of you". ![]() |
![]() |
![]() |
![]() |
#58 | |
DefenderOfTheBuelliverse
![]() Join Date: Feb 2008
Location: Parts Unknown
Moto: Buell XB12R
Posts: 18,585
|
![]()
Looks much better.
__________________
![]() Quote:
|
|
![]() |
![]() |
![]() |
#59 |
Trip's Assistant
![]() Join Date: Feb 2008
Location: Imported from Detroit
Moto: 2009 HD Street Classic
Posts: 12,149
|
![]()
Yeah plus the leds hv lifetime warrenty.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|