Go Back   Two Wheel Fix > In the Garage or Shop > Mechanical or Tech

Reply
 
Thread Tools Display Modes
Old 04-04-2011, 11:25 AM   #1
AquaPython
put it THIS way
 
AquaPython's Avatar
 
Join Date: Nov 2008
Posts: 3,185
Default GSXR 750 clutch plates

seems like its time,
take a look at this link,
http://www.oneidasuzuki.com/store/pa...0-2004-05.html

Do i only need to replace #s 7-11 ?

can the friction plates (10/11) be salvaged by wet sanding ?

how does video rate for instructions ? what is the tool he used to release the spring?

http://www.youtube.com/watch?v=HMjxIGmYcR0
__________________
Quote:
...it'd be like finding a human vagina on your unicorn. Literally fucking incredible.
AquaPython is offline   Reply With Quote
Old 04-04-2011, 11:51 AM   #2
goof2
AMA Supersport
 
goof2's Avatar
 
Join Date: Feb 2009
Posts: 4,756
Default

Look around and see if you can get a service manual online. AMJ's stickied thread at the start of this category is a good place to start. It should list specs for what is acceptable wear on the clutch plates. For my bike (01 R6) there is only one standard for all the clutch plates while yours might have two for the different part numbers. Again, for my bike the standards are based on inspection for damage and the amount of warpage. There is no standard for thickness. Your bike may be different though.

Basically you won't know if the clutch plates are reusable until you remove and inspect them.
goof2 is offline   Reply With Quote
Old 04-04-2011, 12:15 PM   #3
AquaPython
put it THIS way
 
AquaPython's Avatar
 
Join Date: Nov 2008
Posts: 3,185
Default

blah so this will be a 2 part process.
take it out and inspect, then order as needed, wait, put back in.
__________________
Quote:
...it'd be like finding a human vagina on your unicorn. Literally fucking incredible.
AquaPython is offline   Reply With Quote
Old 04-04-2011, 12:44 PM   #4
goof2
AMA Supersport
 
goof2's Avatar
 
Join Date: Feb 2009
Posts: 4,756
Default

Quote:
Originally Posted by AquaPython View Post
blah so this will be a 2 part process.
take it out and inspect, then order as needed, wait, put back in.
You may want to check and see how much more (2 shipping charges vs 1) it would cost to do it that way. All the clutch plates together look like they will cost around $50 so it may be worth it to you to just go ahead and get everything at the same time.
goof2 is offline   Reply With Quote
Old 04-04-2011, 01:38 PM   #5
shmike
Follower
 
shmike's Avatar
 
Join Date: Nov 2008
Posts: 5,549
Default

Quote:
Originally Posted by goof2 View Post
You may want to check and see how much more (2 shipping charges vs 1) it would cost to do it that way. All the clutch plates together look like they will cost around $50 so it may be worth it to you to just go ahead and get everything at the same time.
Yep.

If it is $50 for the whole package just do it all at once and save the hassle.
__________________
Racing For Smiles
shmike is offline   Reply With Quote
Old 04-04-2011, 01:55 PM   #6
AquaPython
put it THIS way
 
AquaPython's Avatar
 
Join Date: Nov 2008
Posts: 3,185
Default

True. My shopping cart was emptied out, but it was about 200 for all of those plates. i dont need to replace the spring, right? anything else?

can I use something like needle nose pliers to compress the spring?
__________________
Quote:
...it'd be like finding a human vagina on your unicorn. Literally fucking incredible.
AquaPython is offline   Reply With Quote
Old 04-04-2011, 03:24 PM   #7
goof2
AMA Supersport
 
goof2's Avatar
 
Join Date: Feb 2009
Posts: 4,756
Default

Springs are the same deal. If they are no longer the proper length (should be in the service manual) they "should" be replaced. As long as they aren't broken I don't think most people bother though.

It may involve a bit more down time, but it would probably be better to take the clutch apart now and figure out exactly what you are going to need. Really everything in the clutch, including the clutch basket, are "as needed" parts but you won't know what is needed until it is disassembled. Your clutch might not even be acting up due to worn plates. Your pressure plate may have uneven or not enough pressure due to broken springs and your plates may be fine.

Unless the bike serves as your only means of transportation take the clutch apart the next time you get the chance. Figure out what parts you do and don't need and place the order the next day.
goof2 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:35 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.