Go Back   Two Wheel Fix > General > Cage Hell > Cage Tech

Reply
 
Thread Tools Display Modes
Old 02-08-2010, 11:12 PM   #21
101lifts2
WSB Champion
 
101lifts2's Avatar
 
Join Date: Nov 2008
Location: Anaheim, CA
Moto: 2009 Kawi ZX6R
Posts: 5,570
Default

Quote:
Originally Posted by fasternyou929 View Post
Funny, it HAPPENED to my car.

It was a GM. Go figure.

ETA: Link for 101. "Basic Hydraulic Components" mentions blistering

http://books.google.com/books?id=sjd...age&q=&f=false
I've heard of what this describes, but it was never referred to as blistering. Usually the hose swells and collapses.

Triple, check to see if the hose collapses or swells when the brake pedal is applied and released. If it doesn't, I would be surprised if this fixes it.
__________________
Train Hard

Ron Paul - 2012

Mark of Excellence
GM
101lifts2 is offline   Reply With Quote
Old 02-09-2010, 08:34 AM   #22
fasternyou929
SFL Expatriate #2
 
fasternyou929's Avatar
 
Join Date: Nov 2008
Location: Raleigh, NC
Moto: CBR1000
Posts: 2,043
Default

Quote:
Originally Posted by 101lifts2 View Post
I've heard of what this describes, but it was never referred to as blistering. Usually the hose swells and collapses.

Triple, check to see if the hose collapses or swells when the brake pedal is applied and released. If it doesn't, I would be surprised if this fixes it.
When it happened to me it was undetectable from the outside. The failure occured inside the metal reinforced line so all looked fine by visible inspection, which led me to replace the caliper only to have the same problem. I had to remove the hose and shine a flashlight inside to see the collapsed area.
fasternyou929 is offline   Reply With Quote
Old 02-10-2010, 12:40 AM   #23
101lifts2
WSB Champion
 
101lifts2's Avatar
 
Join Date: Nov 2008
Location: Anaheim, CA
Moto: 2009 Kawi ZX6R
Posts: 5,570
Default

Quote:
Originally Posted by fasternyou929 View Post
When it happened to me it was undetectable from the outside. The failure occured inside the metal reinforced line so all looked fine by visible inspection, which led me to replace the caliper only to have the same problem. I had to remove the hose and shine a flashlight inside to see the collapsed area.

When you bleed the caliper, was the fluid flow normal?
__________________
Train Hard

Ron Paul - 2012

Mark of Excellence
GM
101lifts2 is offline   Reply With Quote
Old 02-10-2010, 12:52 AM   #24
fasternyou929
SFL Expatriate #2
 
fasternyou929's Avatar
 
Join Date: Nov 2008
Location: Raleigh, NC
Moto: CBR1000
Posts: 2,043
Default

Quote:
Originally Posted by 101lifts2 View Post
When you bleed the caliper, was the fluid flow normal?
Yeah, the master cylinder creates enough pressure to push fluid through the damaged/collapsed part of the hose. Visual inspection was the only way to tell (well, that or replacing everything and still having a problem).
fasternyou929 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:28 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.