Go Back   Two Wheel Fix > In the Garage or Shop > Riding Gear

Reply
 
Thread Tools Display Modes
Old 10-20-2012, 03:04 PM   #1
RACER X
AMA Supersport
 
RACER X's Avatar
 
Join Date: Nov 2008
Location: Richmond, Tx
Moto: '10 Tuono Factory
Posts: 4,569
Default Arai dual pane shield, anyone?

anyone have it? opinion?

i ride year round, and the winter months are coming.
i've had several arai's and while great helmets i still get fogging.

cuz of my asian short flat nose, i get fogging in any lid.

my current HJC RPS-10 has the pinlock set up and i wasn't too fond of it.


description:
The most effective way to prevent fogging on your Arai Corsair-V or RX-Q helmet’s faceshield is with the installation of this Arai Dual Pane SAI visor. Fog free vision is provided by the addition of a layer of insulating air within an airtight chamber between the outer, 4mm impact resistant visor and an insert on the inner-side. This airtight chamber is manifested via a seal that runs the circumference of the factory-made insert. And, because this additional pane is extended around the circumference of the helmet’s eyeport gasket, vision is left totally unobstructed for the rider. Save for the tear-off posts on either edge, the rider will not see anything to hint of the added fog protection.

__________________
ΜΟΛΩΝ ΛΑΒΕ
2014 GROM! 181cc of FURY
2010 Aprilia Tuono Factory - SOLD
2009 SFV Gladius - SOLD
2008 Hayabusa - SOLD.
RACER X is offline   Reply With Quote
Old 10-20-2012, 04:21 PM   #2
Trip
Hold mah beer!
 
Trip's Avatar
 
Join Date: Feb 2008
Location: 80 Miles South of Moto Heaven
Moto: 08 R1200GS
Posts: 23,268
Default

I have a pinlock visor on the Schuberth, it works decent, but still fogs.
__________________
Quote:
Originally Posted by ebbs15 View Post
according to the article tell him to drink ginger tea...
Quote:
Originally Posted by Tigger
Whatever,Stoner is a bitch! O.J. Simpson has TWO fucked knees and a severe hang nail on his left index finger but he still managed to kill two younger adults,sprint 200 feet to his car (wearing very expensive,yet uncomfortable Italian shoes) and make his get a way!!!
Trip is offline   Reply With Quote
Old 10-20-2012, 05:10 PM   #3
RACER X
AMA Supersport
 
RACER X's Avatar
 
Join Date: Nov 2008
Location: Richmond, Tx
Moto: '10 Tuono Factory
Posts: 4,569
Default

on the HJC it never fogged, just reduced visibility. around the seam area
__________________
ΜΟΛΩΝ ΛΑΒΕ
2014 GROM! 181cc of FURY
2010 Aprilia Tuono Factory - SOLD
2009 SFV Gladius - SOLD
2008 Hayabusa - SOLD.
RACER X is offline   Reply With Quote
Old 10-21-2012, 02:15 PM   #4
G-Rex
Where to next?
 
G-Rex's Avatar
 
Join Date: Nov 2008
Location: OK to the C
Moto: TL1000R, Hayabusa, R1150RT
Posts: 1,333
Default

I've been very impressed with the Pinlock on my Schuberth. It hasn't fogged ever, and that includes doing highway riding in 22 degrees.

My biggest gripe with it is just the *seam* or the line of the bottom of the Pinlock. If I crack the shield just a bit, I'm looking through 3 lines, the line at the bottom of the Pinlock, the line at the bottom of the shield, and then the helmet. If I have the sunvisor down it's even worse.

It's not *bad*, just more annoying than anything.
__________________
G-Rex is offline   Reply With Quote
Old 10-22-2012, 09:42 AM   #5
azoomm
moderator chick

 
azoomm's Avatar
 
Join Date: Feb 2008
Location: Hill Country TX
Moto: Pasta Rockets
Posts: 8,917
Default

Quote:
Originally Posted by Trip View Post
I have a pinlock visor on the Schuberth, it works decent, but still fogs.
Mine too. Maybe Trace doesn't breathe?
__________________
We have enough youth. How about a fountain of "smart"?

Come Play at the Track!!

http://www.elitetrackdays.com
azoomm is offline   Reply With Quote
Old 10-22-2012, 09:53 AM   #6
Trip
Hold mah beer!
 
Trip's Avatar
 
Join Date: Feb 2008
Location: 80 Miles South of Moto Heaven
Moto: 08 R1200GS
Posts: 23,268
Default

Quote:
Originally Posted by azoomm View Post
Mine too. Maybe Trace doesn't breathe?
LOL, mine does it in a cold rain easily.
Trip is offline   Reply With Quote
Old 10-22-2012, 07:43 PM   #7
njchopper87
Bored
 
njchopper87's Avatar
 
Join Date: Dec 2008
Location: Sumter, SC
Moto: '01 Spirit 750
Posts: 1,535
Default

I've been looking into something like this for my scorpion.. anti-fog shield my ass. (Yes, I know it's not designed for cruisers, but it was on sale!)
__________________
Quote:
The closer you get to something, the tougher it is to see it.
El psy congroo.
njchopper87 is offline   Reply With Quote
Old 10-23-2012, 08:55 AM   #8
RACER X
AMA Supersport
 
RACER X's Avatar
 
Join Date: Nov 2008
Location: Richmond, Tx
Moto: '10 Tuono Factory
Posts: 4,569
Default

helmet is a helmet, doesn't matter the bike


we're glad you wear a lid w/ your cruiser!
__________________
ΜΟΛΩΝ ΛΑΒΕ
2014 GROM! 181cc of FURY
2010 Aprilia Tuono Factory - SOLD
2009 SFV Gladius - SOLD
2008 Hayabusa - SOLD.
RACER X is offline   Reply With Quote
Old 12-12-2012, 08:57 PM   #9
RACER X
AMA Supersport
 
RACER X's Avatar
 
Join Date: Nov 2008
Location: Richmond, Tx
Moto: '10 Tuono Factory
Posts: 4,569
Default

a while back i asked about this piece and nobody had 1, so i ordered it.

$100 for the screen is pretty pricey, vs $50 for a reg. screen

but a pinlock screen is $35

its a bit thicker then a reg. screen so you don't want to be taking this thing off and on, also no brow vents. harder to latch to cuz of the thickness

anyways, this morn was the first time i got to try it

39 deg.

i works GREAT! no fogging what so ever.

no hint of fogging at all

there's a thick rubber seal at the top to prevent water from coming down inside the shield also , i;m sure it'd work great

wished i had it last week when it was cold and foggy.

rubber seal


thickness


only wish it came in dk smoke vs light.

but yes i would recommend this piece of kit, just leave it on the lid all winter long
__________________
ΜΟΛΩΝ ΛΑΒΕ
2014 GROM! 181cc of FURY
2010 Aprilia Tuono Factory - SOLD
2009 SFV Gladius - SOLD
2008 Hayabusa - SOLD.
RACER X is offline   Reply With Quote
Old 12-22-2012, 10:39 AM   #10
Amber Lamps
Moto GP Star
 
Join Date: Mar 2008
Posts: 14,556
Default

I've always used Fog City products here in Mi and have always been super happy. Because they install on any shield, you can use them on your tinted ones.

http://www.motosport.com/motorcycle/...R-ARAI-HELMETS
. They also have a light sensitive piece but it didn't last long enough for $50 IMHO.
Amber Lamps is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:09 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.