techlusion vs bazzaz vs powercommander vs ecu flash????

OTB · 08-10-2010, 05:49 PM

If you want fuel and timing flexibility, get the PC. Most of the bikes that we custom dyno/map (5-10/wk) are waayyy off the correct ratio, downloaded "custom" maps and all. Bazazz are ok, and the high-end will get you TC, but no timing adjustment (why?), whereas the PC has fewer bells and whistles, but is easier to tune, has timing, and with a careful tuner, can get almost ideal fuel/air across the board.

And a decent map for every gear/throttle position takes about 3 hrs, not 1...if they're doing it in an hour, they're either only doing top gear, or they're only doing the top third of the throttle positions.

We remap 2-3 bikes/week done poorly by other shops.

JMHO

08-10-2010, 05:49 PM	#8
OTB The Man Join Date: Feb 2008 Location: CrabTown USA Moto: 00 Bimota DB4 Posts: 823	If you want fuel and timing flexibility, get the PC. Most of the bikes that we custom dyno/map (5-10/wk) are waayyy off the correct ratio, downloaded "custom" maps and all. Bazazz are ok, and the high-end will get you TC, but no timing adjustment (why?), whereas the PC has fewer bells and whistles, but is easier to tune, has timing, and with a careful tuner, can get almost ideal fuel/air across the board. And a decent map for every gear/throttle position takes about 3 hrs, not 1...if they're doing it in an hour, they're either only doing top gear, or they're only doing the top third of the throttle positions. We remap 2-3 bikes/week done poorly by other shops. JMHO __________________ http://www.decreasingradius.net/