Help I've Been Attacked By The 4.6 Spark Plug Curse!!!

[derf]

I had to re thread one of the spark plug holes on my parents for explorer, the thread kit I used, which looks very similar to the one you are showing wouldnt let me get the tap screwed in even with thin wall sockets.

I wound up having to grind down the tap until it fit a much smaller socket. Then to get to the spark plug hole with the ratchet to drive it in, I went through the wheel well, but I had to use 2 feet worth of extensions to clear the fender, so I needed a second person to watch the tap go in so I didnt screw that up. It would have been easier and quicker to remove the engine as it took almost 10 hours, for one spark plug!!!! And I'm also sure that I got some shavings in the cylinder too.

In the end it did work, and now, 40k later that spark plug is still in there

[Amber Lamps]

Originally Posted by derf

I had to re thread one of the spark plug holes on my parents for explorer, the thread kit I used, which looks very similar to the one you are showing wouldnt let me get the tap screwed in even with thin wall sockets.

I wound up having to grind down the tap until it fit a much smaller socket. Then to get to the spark plug hole with the ratchet to drive it in, I went through the wheel well, but I had to use 2 feet worth of extensions to clear the fender, so I needed a second person to watch the tap go in so I didnt screw that up. It would have been easier and quicker to remove the engine as it took almost 10 hours, for one spark plug!!!! And I'm also sure that I got some shavings in the cylinder too.

In the end it did work, and now, 40k later that spark plug is still in there

Yea, I'm ordering the kit tomorrow as the kit from advance had the problem you and both described. Imho that's a complete tool failure to put a head bigger than the one used to drive in the spark plug. The plug would have to be almost flush with the head for it to work! I'm hoping that this kit doesn't have that problem.

[Amber Lamps]

Originally Posted by derf

I had to re thread one of the spark plug holes on my parents for explorer, the thread kit I used, which looks very similar to the one you are showing wouldnt let me get the tap screwed in even with thin wall sockets.

I wound up having to grind down the tap until it fit a much smaller socket. Then to get to the spark plug hole with the ratchet to drive it in, I went through the wheel well, but I had to use 2 feet worth of extensions to clear the fender, so I needed a second person to watch the tap go in so I didnt screw that up. It would have been easier and quicker to remove the engine as it took almost 10 hours, for one spark plug!!!! And I'm also sure that I got some shavings in the cylinder too.

In the end it did work, and now, 40k later that spark plug is still in there

Maybe this summer I'll recall my old love of working on cars... Almost 15 years of new vehicles has spoiled me!

What really pisses me off is that I was on my way to get bike oil and when I got back I was so distracted thqt I refilled my bike with the drain plug still out! 3 qts of Lucas racing full synthetic in the pan... That hurts almost more than the plug....

[derf]

Originally Posted by Amber Lamps

Maybe this summer I'll recall my old love of working on cars... Almost 15 years of new vehicles has spoiled me!

What really pisses me off is that I was on my way to get bike oil and when I got back I was so distracted thqt I refilled my bike with the drain plug still out! 3 qts of Lucas racing full synthetic in the pan... That hurts almost more than the plug....

Hahaha on the oil, I got a little flag that covers the starter so I don't ever screw up a little worse than that during oil changes. I'm with you on the new car thing though, a warranty and no worries is nice