Tire balancing - Page 4

Tmall · 11-21-2009, 04:29 PM

If you're adding a bunch of weight, I can see it acting as a damper.... That's the only logical reason I can come I with.

RedRider2k2 · 11-21-2009, 04:33 PM

Quote:

Originally Posted by Tmall

If you're adding a bunch of weight, I can see it acting as a damper.... That's the only logical reason I can come I with.

Weight as in wheel weights to balance it or the weight of the balancer we're installing? Because I dont think there is any wheel weights being installed with it and the weight of the balancer is not much at all.

RedRider2k2 · 11-21-2009, 04:42 PM

I dont think these are the same brand that we use but it's the same idea.

http://www.centramatic.com/Page.aspx?page=Demo

By doing something like this you're also balancing the entire hub/drum/wheel assembly. Not just the wheel.

HRCNICK11 · 11-27-2009, 09:56 AM

Has anyone else notice that dunlops seem to take a crap load of weight to be balance. I have never like dunlops but the few times I have ran them they take a lot to balance.

defector · 11-27-2009, 10:16 AM

Not sure about motorcycles, but cars have something they call "road force balancing".

I personally just use a dial indicator to get the lowest runout I can.

11-21-2009, 04:42 PM	#33
RedRider2k2 Holier Than Thou Join Date: Nov 2008 Location: N.B, Canada Moto: 06 ZX10R, 18 400 Ninja, 11 KLX250s Posts: 463	I dont think these are the same brand that we use but it's the same idea. http://www.centramatic.com/Page.aspx?page=Demo By doing something like this you're also balancing the entire hub/drum/wheel assembly. Not just the wheel. __________________ Good judgement is the product of experience...Experience is the product of bad judgement. Sometimes The Faster It Gets, The Less You Need To Know. But You Gotta Remember The Smarter It Gets, The Furthur It's Gonna Go. Last edited by RedRider2k2; 11-21-2009 at 04:49 PM..

11-27-2009, 10:16 AM	#35
defector My balls, your chin Join Date: Nov 2008 Location: The desert of Az Moto: 929, SV650, YZ250 Posts: 1,917	Not sure about motorcycles, but cars have something they call "road force balancing". I personally just use a dial indicator to get the lowest runout I can. __________________ Reading this signature may give you special powers, including the ability to run through walls. You should try it immediately.

11-21-2009, 04:29 PM	#31
Tmall Aspiring Rapper Join Date: Nov 2008 Location: Halifax, NS Moto: '12 CB1000R Posts: 3,569	If you're adding a bunch of weight, I can see it acting as a damper.... That's the only logical reason I can come I with.

11-27-2009, 09:56 AM	#34
HRCNICK11 Canyon Carver Join Date: Nov 2008 Posts: 429	Has anyone else notice that dunlops seem to take a crap load of weight to be balance. I have never like dunlops but the few times I have ran them they take a lot to balance.