1975 Kawasaki Triple

['73 H1 Triple]

Originally Posted by Phenix_Rider

WOW- H1, No Worries, thanks for all the info! I just emailed dad the links. I'll let you know when he signs up. We were running errands today and looked a few places for a Haynes or Clymers manual- couldn't find one, but I'll check a few dealers tomorrow.

The guy he's getting it from doesn't seem to know much about it. Good guy, but it sounds like he got some misinformation. He says he cleaned/rebuilt the carbs, and that it was run on the street not too long ago. Problem is, he said it's a four-stroke, and it sounds like the carbs are all out of whack, and the petcock may leak. Unfortunately, I haven't seen the thing firsthand yet. Apparently, the title only says it's a 1975 Kawasaki 500. I've told dad the first thing we need to do is replace the tubes, tires, and brake lines, and rebuild/synch the carbs.

I'm looking forward to riding this thing. It'll mostly be used as a commuter, so that 78mpg sounds great, and the 60hp and 42ft-lbs sounds frightening with skinny tires and old components.

Both the Haynes and the Clymer have some mistakes in them. He can download the Glenn's manual off the resource link. That has both general maintence and performance tips in it. Best book you could buy and you can download it for free.

Where did the 78mpg come from? You'll get 30 or so if your lucky. These were made for mileage, they were made to kick ass.

Originally Posted by Phenix_Rider

"High bars" to me are like the stockers on my 650R. It probably has the stock bars on it still. I'm sure I'd go to superbike bars or clipons, but it's dad's bike, so whatever he's comfortable with. As long as he's safe, fine with me.

Superbike bars are the way to go. Just slightly lower than stock and they help keep the front end down.

Originally Posted by BobTheBiker

I hate high handlebars. lower ones look and feel much better.


On a side note, I have a friend selling a complete GT750triple motor and some misc parts for one here local to me if anyone is interested in it. I'll even crate it and handle the shipping if you're wanting it enough.

If you give a description and some type of contact info, I'll post it up on the triple forum.

Jeff

[Particle Man]

looks like a ton of fun (both to ride and wrench on)

['73 H1 Triple]

Originally Posted by Particle Man

looks like a ton of fun (both to ride and wrench on)

Parts are fairly easy to get ( some are still available from kawasaki ) and the bikes are a ton of fun too.

[BobTheBiker]

Originally Posted by '73 H1 Triple

If you give a description and some type of contact info, I'll post it up on the triple forum.

Jeff

I just sent you a PM about it. next time I'm over there I'll take some time and photograph the engine if I remember my camera.

[Phenix_Rider]

Anyone know where to find keys for really old bikes? Got one with the triple, but it would be really nice to have a spare. We've checked some dealers, and Kawi discontinued most of the '75 parts in '90. Can't find a blank anywhere. May end up having a locksmith grind a riding lawnmower key to fit

['73 H1 Triple]

Originally Posted by Phenix_Rider

Anyone know where to find keys for really old bikes? Got one with the triple, but it would be really nice to have a spare. We've checked some dealers, and Kawi discontinued most of the '75 parts in '90. Can't find a blank anywhere. May end up having a locksmith grind a riding lawnmower key to fit

What key number do you need? If it's 911 or 919, prepare to dig very deep in your pocket for a NOS key.

If you just want a copy, blanks are easy to get.

If you don't want to post the key number, PM me and I'll help you out.

Jeff

[Phenix_Rider]

Originally Posted by '73 H1 Triple

What key number do you need? If it's 911 or 919, prepare to dig very deep in your pocket for a NOS key.

If you just want a copy, blanks are easy to get.

If you don't want to post the key number, PM me and I'll help you out.

Jeff

I just need a copy. Thought you had to go to a dealer for a blank. But this thing looks close enough to a lawnmower key

['73 H1 Triple]

Originally Posted by Phenix_Rider

I just need a copy. Thought you had to go to a dealer for a blank. But this thing looks close enough to a lawnmower key

Let me know the key number, I might have a key blank.

The key blanks I have here are for the ODD numbers between 911 and 919.

OR

go to www.key-men.com and get a blank from them. Email them, describe the cycle ( year, make model & key number) and they'll make sure you get the correct blank.

They can also "cut from code" if you would loose the key but still have the number.

Jeff

[speedylocksmith]

Originally Posted by '73 H1 Triple

What key number do you need? If it's 911 or 919, prepare to dig very deep in your pocket for a NOS key.

If you just want a copy, blanks are easy to get.

If you don't want to post the key number, PM me and I'll help you out.

Jeff

I think you are getting the key blank number confused with the key code. The key blank number isn't the cuts of the key, that's the key code

['73 H1 Triple]

Originally Posted by speedylocksmith

I think you are getting the key blank number confused with the key code. The key blank number isn't the cuts of the key, that's the key code

The triples have the key code stamped in the ignition, steering lock and seat lock. I have three different keys in the correct range that may fit his cycle, 911, 915 and 919. The Kawasaki key blank is number 1025 for the odd numbered keys above.

If you were to purchase a YH40 blank from key-men, they could cut the correct code to the blank.

Is that clearer on what I was explaining?

Jeff