|
 |
 |
 |
 |
 |
 |
 |
 |
01-21-2009, 11:00 AM
|
#24 |
|
Perpetual trouble
Join Date: Jun 2008
Location: at the base of the Alps
Moto: VTX 1300C, RC51, CBR600RR, CBR929RR
Posts: 715
|
So the plexiglass idea got pitched and I've decided to use foam to make the mold and then lay the final in 'glass. Wile I'm doing this little project, I intend to upgrade the lights out back. I managed to pick up some bright ass LED turn signals and a plate light, but I'm looking into replacing the stock brake light assembly. I don't need to go the whole integrated route, but I need something. The stock stuff comes in a HUGE housing with 2 bulbs that are, as of right now, a pain in the ass the change (i.e. take a apart the entire tail just to get at 'em) and if you have ever owned an RC, you know how often that can be.
I need something LED and dual intensity. I was hoping to find a dual intensity LED strip light ~4" long so I could just stack a few of 'em one above the other and get a big enough light working. Any ideas?
__________________
"Life is not a journey to the grave with the intention of arriving safely in one pretty and well preserved piece, but to skid across the line broadside, thoroughly used up, worn out, leaking oil, shouting GERONIMO!" |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode