Aftermarket Levers...Which are the best?

was92v · 04-26-2009, 10:07 AM

The noise is the chain/sprockets. The quicker it comes back, the worse they are. The noise will go away when the worn stuff goes away.

Mr Lefty · 04-26-2009, 10:16 AM

as far as levers... there are a few good brands out their... but I've only had Pazzo's... I liked them on my ZZR... so I ordered another set for my 600RR... though this time I went with the shorty version.

the adjustable is not gonna do much about how hard it is to pull... it'll just position the lever in it's static position (ie where the lever starts) closer to or further from the grips.

that's why I got them... so I could pull the lever in all the way and not crush my little fingers... and also I only use 2 fingers anyhow...

have you lubed the clutch cable? that may make it a little easier to pull... other than that I'm at a loss for how to ease that up for you

tached1000rr · 04-26-2009, 11:11 AM

I would agree about trying to lube your clutch cable. How many miles on your chain and sprocket?

zippychickie636 · 04-26-2009, 12:31 PM

thanks for the advice guys. There's deffinatly alot of miles on the chain and sprockets I mean I got the bike at 13,000 miles in oct. and I don't know if/when the previous owner chained them last, and now the bikes at 16700...so I know I'm pushin it. I'm very cautious though with the whole thing so it's not like I'm not gonna replace it. I was just curious about whether the noise was related or not but from the looks of things it sure is. thanks again

tached1000rr · 04-26-2009, 12:33 PM

Yep I'd go ahead and do the chain and sprockets it will provide piece of mind and like you said you don't know what type of maintenance (if any) the previous owner provided.

tached1000rr · 04-26-2009, 12:35 PM

Some of the guys/gals on the board here in your area may be able to help out with the install to save your some $$$$.

zippychickie636 · 04-26-2009, 12:45 PM

yea I really need to learn how to do some of this maitenance myself. It's so expensive to have it done. I have a couple people around here always offering to help me do some stuff to my bike and just let them know but every time it comes down to getting it done they dissappear...boo. lol

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-26-2009, 10:07 AM	#1
was92v Nowhere Man Join Date: Nov 2008 Posts: 558	The noise is the chain/sprockets. The quicker it comes back, the worse they are. The noise will go away when the worn stuff goes away.

04-26-2009, 10:16 AM	#2
Mr Lefty TWFix Legend Join Date: Feb 2008 Location: Denver CO Moto: 01 BMW F650GS Dakar Posts: 15,677	as far as levers... there are a few good brands out their... but I've only had Pazzo's... I liked them on my ZZR... so I ordered another set for my 600RR... though this time I went with the shorty version. the adjustable is not gonna do much about how hard it is to pull... it'll just position the lever in it's static position (ie where the lever starts) closer to or further from the grips. that's why I got them... so I could pull the lever in all the way and not crush my little fingers... and also I only use 2 fingers anyhow... have you lubed the clutch cable? that may make it a little easier to pull... other than that I'm at a loss for how to ease that up for you

04-26-2009, 11:11 AM	#3
tached1000rr WERA White Plate Join Date: Dec 2008 Location: NC Moto: 2009 GSXR 1300 Posts: 2,448	I would agree about trying to lube your clutch cable. How many miles on your chain and sprocket?

04-26-2009, 12:31 PM	#4
zippychickie636 Street Stunter Join Date: Dec 2008 Location: NJ Moto: 2005 zx6r (636) Posts: 80	thanks for the advice guys. There's deffinatly alot of miles on the chain and sprockets I mean I got the bike at 13,000 miles in oct. and I don't know if/when the previous owner chained them last, and now the bikes at 16700...so I know I'm pushin it. I'm very cautious though with the whole thing so it's not like I'm not gonna replace it. I was just curious about whether the noise was related or not but from the looks of things it sure is. thanks again

04-26-2009, 12:33 PM	#5
tached1000rr WERA White Plate Join Date: Dec 2008 Location: NC Moto: 2009 GSXR 1300 Posts: 2,448	Yep I'd go ahead and do the chain and sprockets it will provide piece of mind and like you said you don't know what type of maintenance (if any) the previous owner provided.

04-26-2009, 12:35 PM	#6
tached1000rr WERA White Plate Join Date: Dec 2008 Location: NC Moto: 2009 GSXR 1300 Posts: 2,448	Some of the guys/gals on the board here in your area may be able to help out with the install to save your some $$$$.

04-26-2009, 12:45 PM	#7
zippychickie636 Street Stunter Join Date: Dec 2008 Location: NJ Moto: 2005 zx6r (636) Posts: 80	yea I really need to learn how to do some of this maitenance myself. It's so expensive to have it done. I have a couple people around here always offering to help me do some stuff to my bike and just let them know but every time it comes down to getting it done they dissappear...boo. lol