Those of you running stainless steel brake lines?

tached1000rr · 04-30-2009, 12:45 AM

Quote:

Originally Posted by TIGGER

ebs hh

They work good in the rain/wet?

Rsv1000R · 04-30-2009, 07:35 AM

Mine came with them too....

If fact all of them did.

Amber Lamps · 04-30-2009, 11:03 AM

Quote:

Originally Posted by tached1000rr

They work good in the rain/wet?

Oh yea, they are great pads. I believe there are better pads out there but for the money and over all, I like the EBS brakes the best. I've used Ferodo, Galfer, Dunlopad, Vesrah and SBK in the past. Dunlopad and Ferodo have a HUGE initial hit but I believe (and this is in the past, mind you) that they faded on me a bit. Plus Dunlopad was a bear to break in and had a tendency to squeak/squeal if they were done wrong.

t-homo · 04-30-2009, 11:54 AM

A lot of the guys down here who go to the track regularly run the vesrah pads that are like 200 bucks a set. They seem to love them, even for the money.

PhiSig1071 · 04-30-2009, 01:41 PM

I have them on the GSXR and the KTM, and I would never look back. Very happy with them.

BobTheBiker · 04-30-2009, 02:10 PM

I had them on a couple EX500's and LOVED em. want a set for my ZX1000. they just make the brake feel SO much more even and generally more constant. its a night and day difference, no doubt in my mind.

zed · 04-30-2009, 02:14 PM

ok, did you guys get the bike specific kits or did you go with the assemble yourself kits (straight hoses and you screw the ends on)?

Amber Lamps · 04-30-2009, 02:20 PM

Quote:

Originally Posted by zed

ok, did you guys get the bike specific kits or did you go with the assemble yourself kits (straight hoses and you screw the ends on)?

Yea even I'm not that cheap! I get the bike specific kit.

Homeslice · 05-08-2009, 04:16 AM

I put steel lines on 2 bikes and 2 cars, and noticed no improvement at all.

IMO, the rotors, pads, and master cylinder design makes much more of a difference.

t-homo · 05-08-2009, 08:12 AM

That's why I love this little guy.

04-30-2009, 01:41 PM	#5
PhiSig1071 Let go of my ears. Join Date: Feb 2008 Location: Jacksonville, FL Moto: '03 GSX-R600, '04 625SMC Posts: 1,394	I have them on the GSXR and the KTM, and I would never look back. Very happy with them. __________________ Entia non sunt multiplicanda necessitatem

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-30-2009, 07:35 AM	#2
Rsv1000R WERA White Plate Join Date: Nov 2008 Posts: 1,059	Mine came with them too.... If fact all of them did.

04-30-2009, 11:54 AM	#4
t-homo WSB Champion Join Date: Feb 2008 Location: Springfield, MO Posts: 7,146	A lot of the guys down here who go to the track regularly run the vesrah pads that are like 200 bucks a set. They seem to love them, even for the money.

04-30-2009, 02:10 PM	#6
BobTheBiker too much time on my hands Join Date: Jul 2008 Location: the northern district of god damn Moto: 01 ZX6R, looking for more now. Posts: 1,802	I had them on a couple EX500's and LOVED em. want a set for my ZX1000. they just make the brake feel SO much more even and generally more constant. its a night and day difference, no doubt in my mind.

04-30-2009, 02:14 PM	#7
zed yellow don't corner well Join Date: Feb 2009 Location: Kansas City, KS Moto: 06 ZX10R Posts: 1,243	ok, did you guys get the bike specific kits or did you go with the assemble yourself kits (straight hoses and you screw the ends on)?

05-08-2009, 04:16 AM	#9
Homeslice Elitist Join Date: Nov 2008 Location: SF Bay Area Moto: Gix 750 Posts: 11,351	I put steel lines on 2 bikes and 2 cars, and noticed no improvement at all. IMO, the rotors, pads, and master cylinder design makes much more of a difference.

05-08-2009, 08:12 AM	#10
t-homo WSB Champion Join Date: Feb 2008 Location: Springfield, MO Posts: 7,146	That's why I love this little guy.