Changing Tires?

dReWpY · 08-12-2009, 11:30 AM

are the gs tires tubed or tubeless?

Trip · 08-12-2009, 01:34 PM

Quote:

Originally Posted by marko138

What do tires for the GS cost versus sport tires?

about the same

Quote:

Originally Posted by drewpy

are the gs tires tubed or tubeless?

tubeless

marko138 · 08-12-2009, 01:37 PM

Are there modern-ish bikes that still even use tubes?

Gas Man · 08-12-2009, 01:42 PM

Quote:

Originally Posted by marko138

Are there modern-ish bikes that still even use tubes?

allot of spoked wheels use tubes. Any tubeless tire can take a tube into it if it has some wierd slice or somin.

marko138 · 08-12-2009, 01:43 PM

Quote:

Originally Posted by Gas Man

allot of spoked wheels use tubes. Any tubeless tire can take a tube into it if it has some wierd slice or somin.

Right on.

Trip · 08-12-2009, 01:52 PM

Quote:

Originally Posted by marko138

Are there modern-ish bikes that still even use tubes?

Just about every offroad bike. The DRZ uses tubes. I am sure some GS guys that do a lot of offroad run tubes. Too easy to get a cut off asphalt.

marko138 · 08-12-2009, 01:53 PM

Quote:

Originally Posted by Trip

Just about every offroad bike. The DRZ uses tubes.

Word.

PhiSig1071 · 08-12-2009, 03:08 PM

$12.50? That's cheap cpnsidering the hassle of changing tires. I'd pay him.

HRCNICK11 · 08-12-2009, 09:53 PM

Chaining tires is pretty easy if you know how. We do it at the track all the time with the supermoto bikes. Coming up short on a jump can pinch a bead so every one keeps spare tubes and replaces them if they get pinched.

A big guy can break a motorcycle bead just steping on the side wall but don't do this with the rotors on or you will bend them. I have also seen guys use a folding ramp and put the tire near the folding part and and step on the ends.

Don't use your car you will just bend your rims.

Get the harbor feight tire changer that was posted about before it pays for it self after a few changes.

Get some lube it makes the job sooooooo much easier.

Gas Man · 08-12-2009, 01:38 PM

Well the rear on the GS is done like a car tire..

But he's only 50% saved.. front is still all mc

08-12-2009, 03:08 PM	#8
PhiSig1071 Let go of my ears. Join Date: Feb 2008 Location: Jacksonville, FL Moto: '03 GSX-R600, '04 625SMC Posts: 1,394	$12.50? That's cheap cpnsidering the hassle of changing tires. I'd pay him. __________________ Entia non sunt multiplicanda necessitatem

08-12-2009, 01:38 PM	#10
Gas Man Trip's Assistant Join Date: Feb 2008 Location: Imported from Detroit Moto: 2009 HD Street Classic Posts: 12,149	Well the rear on the GS is done like a car tire.. But he's only 50% saved.. front is still all mc __________________ -Chris "Why pay somebody else to fuck up your bike?" Run Amsoil Product

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-12-2009, 09:53 PM	#9
HRCNICK11 Canyon Carver Join Date: Nov 2008 Posts: 429	Chaining tires is pretty easy if you know how. We do it at the track all the time with the supermoto bikes. Coming up short on a jump can pinch a bead so every one keeps spare tubes and replaces them if they get pinched. A big guy can break a motorcycle bead just steping on the side wall but don't do this with the rotors on or you will bend them. I have also seen guys use a folding ramp and put the tire near the folding part and and step on the ends. Don't use your car you will just bend your rims. Get the harbor feight tire changer that was posted about before it pays for it self after a few changes. Get some lube it makes the job sooooooo much easier.