Anyone rode a 2009/2010 ZX6R?

[Homeslice]

Originally Posted by 101lifts2

You can barely push the suspension up and down sitting there (and the front preload is only 1 turn from full soft out of like 20 or something turns).

Did you get it measured and set up for you? I find it hard to believe that someone like you who's 190-200 lbs would only need 1 turn on the preload. Seems like it would cause the suspension to "top out" over bumps and whenever you power out of turns.

the bike cannot compensate for bumps fast enough .

Which is because either it's topping out, or there's too much high-speed damping.

[101lifts2]

Originally Posted by Homeslice

Did you get it measured and set up for you? I find it hard to believe that someone like you who's 190-200 lbs would only need 1 turn on the preload. If your preload is too soft then it will cause the suspension to "top out" over bumps and when you drive out of turns.

Which is because either it's topping out, or there's too much high-speed damping.

This is not a conventional fork, remember. And yes he measured it and it barely moves.