Go Back   Two Wheel Fix > In the Garage or Shop > Mechanical or Tech

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-02-2010, 02:50 PM   #12
OTB
The Man
 
OTB's Avatar
 
Join Date: Feb 2008
Location: CrabTown USA
Moto: 00 Bimota DB4
Posts: 823
Default

You said it earlier: the issue with the Ducati plastic tanks is two-fold: wrong choice/blend of plastics allowing deformation when subjected to high stress over time. The added stress is usually because the vent valve sticks, allowing pressure to build in the tanks when hot, which encourages deformation. Ive had two newer monsters with the tank issue...both riders store their bikes for long periods with the tank full. I think this issue would go away if Ducati would fix the vent valve in the cap.

When you crack the cap when the temps are hot, they nearly blow the cap off. I've seen metal tanks bend and deform during hot weather when the vents stick, and I've seen the tanks collapse during cold weather when the fuel and trapped air condense.
OTB is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:54 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.