Wreck 6-6-08

[azoomm]

Sorry about the get off. REALLY glad you are alright. The bike will come around in no time.

www.findnearby.net that will give you EVERY craigslist.

www.ronayers.com will give you the micro fische for the part numbers

www.sportwheel.com will give you the largest graveyard for motorcycles. They are located in Minnesota, and are usually pretty quick to get back to you Tues - Sat.

Originally Posted by NONE_too_SOFT

found the culprit of the leak. apparently there was a small crack on that little guy, so its drying, and i'll apply plastic expoxy to it tonight and fixxer right up. Then engine ice tomorrow, then a ride up to cycle therapy and see what parts i can pick and choose from when i get the money.

Don't do it, it won't work. Most epoxy won't hold a reservoir together, with the pressure and the composite of the tank you'll blow fluid after a wee bit of time. Ask me how I know....

[NONE_too_SOFT]

Originally Posted by azoomm

Sorry about the get off. REALLY glad you are alright. The bike will come around in no time.

www.findnearby.net that will give you EVERY craigslist.

www.ronayers.com will give you the micro fische for the part numbers

www.sportwheel.com will give you the largest graveyard for motorcycles. They are located in Minnesota, and are usually pretty quick to get back to you Tues - Sat.



Don't do it, it won't work. Most epoxy won't hold a reservoir together, with the pressure and the composite of the tank you'll blow fluid after a wee bit of time. Ask me how I know....

uh huh. Well i already epoxy'd the hell out of it, it was the smallest little crack, how much pressure do those things build anyways? This expoxy i've used before, and its heavy duty stuff.

Im gonna run it tomorrow, but i'll keep a close eye on it. thx for the heads up and all the great info zoomy.

[Cutty72]

Gear doesn't look too bad, at least I know now that my leathers have been tested!

[NONE_too_SOFT]

Originally Posted by Cutty72

Gear doesn't look too bad, at least I know now that my leathers have been tested!

twice.

[t-homo]

Originally Posted by NONE_too_SOFT

twice.

At least now you know it really is good quality.

[Cutty72]

Originally Posted by NONE_too_SOFT

twice.

Originally Posted by t-rock

At least now you know it really is good quality.

Joe Rocket FTW!

[Smittie61984]

Damn bro. Looks like you and gaurdrails have a thing going.

Glad you are okay. Street fighter that biatch

[azoomm]

Originally Posted by NONE_too_SOFT

uh huh. Well i already epoxy'd the hell out of it, it was the smallest little crack, how much pressure do those things build anyways? This expoxy i've used before, and its heavy duty stuff.

Im gonna run it tomorrow, but i'll keep a close eye on it. thx for the heads up and all the great info zoomy.

Well, my experience has come from a bike with that damn Italian *character*. I've blown up three coolant reservoirs - and when I ask about it with the elitest, and/or post on a Ducati specific forum they all just shrug as theirs have all done it too. They run hot, and have a seam in an odd place. It's been frustrating and the answer is to buy a new one. Yours could be different... fingers crossed for you

Anything else presenting an issue for you (other than cosmetic?)??

[DLIT]

Originally Posted by azoomm

Well, my experience has come from a bike with that damn Italian *character*. I've blown up three coolant reservoirs - and when I ask about it with the elitest, and/or post on a Ducati specific forum they all just shrug as theirs have all done it too. They run hot, and have a seam in an odd place. It's been frustrating and the answer is to buy a new one. Yours could be different... fingers crossed for you

Anything else presenting an issue for you (other than cosmetic?)??

Had a buddy witht he same problem. Those things shit the bed WAY too much. Like multiple times in one season too much.

[Gas Man]

Glad you're ok. The bike looks ok.

Fuck looking online... buy a fuckin manual. Buy it, read it, live with it!

Repair what you can, modify some, and buy used on the rest.