AdMore Lighting kit for Givi V35 bags

Papa_Complex · 01-18-2012, 08:41 AM

Almost done wiring up the top box. I ended up using one entire strip of automotive LEDs, under the reflector on the top box, and they're damned near blinding. They're embedded in flexible rubber so I was able to run them right across the back, then bend them into the grab handle area. They're also 3M tape backed, which made it that much easier.

I tested them by hooking them up to a 12V security system battery, that I had laying around. Being in the top box will put them just about at the eye level, of the average vacant driver, so that's perfect.

Gas Man · 01-18-2012, 08:49 PM

Looks good!!!

01-18-2012, 08:41 AM	#1
Papa_Complex Nomadic Tribesman Join Date: Nov 2008 Location: Brampton, Canada Moto: '09 ER-6n Posts: 11,152	Almost done wiring up the top box. I ended up using one entire strip of automotive LEDs, under the reflector on the top box, and they're damned near blinding. They're embedded in flexible rubber so I was able to run them right across the back, then bend them into the grab handle area. They're also 3M tape backed, which made it that much easier. I tested them by hooking them up to a 12V security system battery, that I had laying around. Being in the top box will put them just about at the eye level, of the average vacant driver, so that's perfect. __________________ "Everything's better with pirates." - Lodge, "Dorkness Rising" http://www.morallyambiguous.net/

01-18-2012, 08:49 PM	#2
Gas Man Trip's Assistant Join Date: Feb 2008 Location: Imported from Detroit Moto: 2009 HD Street Classic Posts: 12,149	Looks good!!! __________________ -Chris "Why pay somebody else to fuck up your bike?" Run Amsoil Product

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode