1125 Valve check

[tommymac]

Originally Posted by Cutty72

You realize that it is only 4 nuts (the mirrors) and 2 bolts to remove the front fairing right?

If you split it like I did, it would probably be easier to do the bearings after it's back together. At least frame connected to engine.

thats what I am thinking. I red up on the job in the manual. Seems they want you to use a special tool to compress the bearings into the frame head. On the futura you had to bang out the races and pry the bearring off the lower triple. All in all an easy job, but had to pull off way too much shit on the aprilia. If I get the triumph back sooner as opposed to later I may give it a go on a day off.