My bike needed some pampering

[Mr Lefty]

These breaks require extra heat to operate? I've heard race pads work at a higher temp... that's why they don't recommend them for street... cause you don't often reach those temps

[PiZdETS]

Originally Posted by Ebbs15

These breaks require extra heat to operate? I've heard race pads work at a higher temp... that's why they don't recommend them for street... cause you don't often reach those temps

that was my concern but their little graph on their site has this key for the GFA's;


It's as good in every way as their street legal pads except for the lifetime department. Here's the street legal ones;


Some guys on another forum suggested it may be that EBC was just too lazy to get them approved for road use. I honestly can't understand the concept of too much braking power being dangerous. Unless it's dusty/wet in which case you're fucked anyway with the immense braking power of most stock brake systems on modern sportbikes.
The other idea I have is the "ZOMG IT'S ILLEGAL THEY STOP TOO FAST FOR PUBLIC USE YOU'LL DIEZORS!!!!!!" is all a marketing ploy. So powerful it's illegal kinda has a nice ring to it.

[azoomm]

What rotors do you have?

The different composites aren't always friendly on the rotors, especially if they aren't full floating or drilled right.

[PiZdETS]

Originally Posted by azoomm

What rotors do you have?

The different composites aren't always friendly on the rotors, especially if they aren't full floating or drilled right.

Hmm..stock on an '03 gsxr 1000. Lemme google the specs real quick. Definitely not interested in damaging the rotors.

here's what I could find;

The front brakes were also new. Suzuki decided to drop the six-piston calipers. The new radially-mounted four-piston calipers weigh 30 grams less and grip smaller 300 mm (12 in) discs that save another 300 g (0.66 lb). Though smaller, Suzuki claimed that the new brakes provide better stopping and turn-in performance.

You think I should stick with the vesrah's?

[azoomm]

I've only ever used EBC, and only now have gone to new rotors on the 998. The 748 (which hasn't always had EBC's) has tea-cupped rotors and is inheriting the ones from the 998.

So, I've had better luck with EBC than others.

[Mr Lefty]

what are tea cupped roaters?

[PiZdETS]

Hmm so you think switching brands might be detrimental? Or is tea-cupped a brand? I think I might have tea-bagged rotors.
I'm so confused. Brb, gotta go rock in the fetal position in the corner for a while.

Nice marchesini's btw, here are mine;

[azoomm]

Teacupped = more wear on the center than the outer edges. You've never heard that?

Tea-bagged