Go Back   Two Wheel Fix > In the Garage or Shop > Mechanical or Tech

Reply
 
Thread Tools Display Modes
Old 10-02-2008, 05:49 PM   #1
smileyman
White Trash Hero
 
smileyman's Avatar
 
Join Date: Mar 2008
Location: NW Arkansas
Moto: Buell 1125R Porco Rosso Edition
Posts: 4,895
Default

My experience with the fronts is that the 60 is shorter and steepens the front end, speeding up turn in with less stability...Going to the 120/70 front raised the front and provided a slower turn but more stability.

My SV race bike came with the 60 series front and when I swapped to a 70 I raised the rear by almost a half inch to get it in the sweet spot. My ZX636 came with a 120/65 front and likewise when I switched to the 70 I had to raise the forks a little to get it back turning in sweetly...
__________________

Arkriders.com
To be the best you must first be willing to risk the worst!
smileyman is offline   Reply With Quote
Old 10-02-2008, 06:34 PM   #2
No Worries
Keyboard Racer
 
No Worries's Avatar
 
Join Date: Feb 2008
Location: Mile High City
Moto: Old Superbikes
Posts: 1,016
Default

Quote:
Originally Posted by smileyman View Post
My experience with the fronts is that the 60 is shorter and steepens the front end, speeding up turn in with less stability...Going to the 120/70 front raised the front and provided a slower turn but more stability.

My SV race bike came with the 60 series front and when I swapped to a 70 I raised the rear by almost a half inch to get it in the sweet spot. My ZX636 came with a 120/65 front and likewise when I switched to the 70 I had to raise the forks a little to get it back turning in sweetly...
I agree. Putting the smaller-diameter 60 tire on the bike is almost the same as raising the forks above the triple clamp. Tightens the rake of the fork and quickens the steering, but stability is lessened.
No Worries is offline   Reply With Quote
Old 10-03-2008, 11:06 AM   #3
Gunther1000
Jesus Christ!
 
Gunther1000's Avatar
 
Join Date: Jul 2008
Moto: (The Chi's lover)
Posts: 801
Default

I hear you both and while I do know the effect it will have I don't have any ride experiance with a 60. So would anyone be able to tell me if they noticed any shortage of side wall traction in the 60 vs the 70? Thats my only question really...
__________________
FTP
Gunther1000 is offline   Reply With Quote
Old 10-03-2008, 11:27 AM   #4
DLIT
Clit Commander
 
DLIT's Avatar
 
Join Date: Feb 2008
Location: Las Vegas
Moto: 2012 Ducati 1199 Panigale S
Posts: 4,189
Default

If it helps, I started on a '04 R6 and they came with a 60 series. My '06 had a 70 in it. The 60 turns in faster, but it's not as smooth as the 70 throughout the whole corner. That doesn't means it's bad, but after riding on both, I prefer the 70 over the 60. And I don't remember any shortage of sidewall traction. I had no chicken strips on my front of the '04 before I traded it in. I was running Pilot Powers. Tire make will make a difference. Not sure how big of a difference, but there will be one.
__________________
Dress for the crash.
Not the ride.

DLIT is offline   Reply With Quote
Old 10-03-2008, 12:17 PM   #5
smileyman
White Trash Hero
 
smileyman's Avatar
 
Join Date: Mar 2008
Location: NW Arkansas
Moto: Buell 1125R Porco Rosso Edition
Posts: 4,895
Default

I had no issues with outright traction on either. And that was at the race track. I mean either your in hot and the front pushes or it doesn't eh? I did notice the feel of the 70 being better on turn in due to the different profile. It was tippy even with the suspension adjusted. By that I mean countersteering it onto its side felt somehow better than the 60. More aggressive or confident. Perhaps it was just a placebo effect that gave me more confidence knowing there was extra traction there if I needed it.

This despite most of my front end slide experience came on worn 70 series tires. I did have more laps on the 70 than the 60 so there were more opportunities for front slides. Probably 9 outta 11 races were on the 70 series that year and I have never raced on anything but a 70 since. My ZX636 came with teh 65 size OEM but I converted to 70 with the very first set....
__________________

Arkriders.com
To be the best you must first be willing to risk the worst!
smileyman is offline   Reply With Quote
Old 10-03-2008, 08:08 PM   #6
Gunther1000
Jesus Christ!
 
Gunther1000's Avatar
 
Join Date: Jul 2008
Moto: (The Chi's lover)
Posts: 801
Default

Well, I may have to report back on this one as I plan to test a 60 very soon...
__________________
FTP
Gunther1000 is offline   Reply With Quote
Old 10-04-2008, 01:11 AM   #7
marko138
DefenderOfTheBuelliverse
 
marko138's Avatar
 
Join Date: Feb 2008
Location: Parts Unknown
Moto: Buell XB12R
Posts: 18,585
Default

Fuck that 60.
__________________


Quote:
Grandma said she doesn't want you here when she gets back because you've been ruining everybody's lives and eating all our steak.
marko138 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:57 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.